Skip Navigation

Bearings

Main text

Radial Ball Bearings

Deep Groove Ball Bearings

深みぞ玉軸受
  • Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.
  • The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).
  • Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
Details

Single-row Angular Contact Ball Bearings

Single-row Angular Contact Ball Bearings
  • The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.
  • Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
    Larger contact angle type has better axial load capability.
    Small contact angle type has higher permissible speed capability.
  • This bearing type is generally used in adjacent positions.
Details

Combination Angular Contact Ball Bearings

組合せアンギュラ玉軸受
  • Normally Single Row Angular Contact Ball Bearings are used as a combination of two or more bearings.
  • Three types of combinations are available;
    1) DB, back to back
    2) DF, face to face
    3) DT, tandem
  • Clearance of matched set are adjusted before shipment, care should be taken to prevent mixing of parts from other sets.
  • High precision paired combination Angular Contact Ball Bearings (JIS/ISO class 5 or higher) are used for applications such as machine tool spindles and are usually preloaded.
Details

Double-row Angular Contact Ball Bearings

複列アンギュラ玉軸受
  • The construction of this ball bearing is similar to mounting two single row angular ball bearings back to back(DB).
  • Capacities of double row ball bearing is less than single row since few balls can be inserted per row.
  • This bearing type can sustain radial, moment and bi-directional axial loads.
Details

Self-aligning Ball Bearings

自動調心玉軸受
  • This type is constructed with the inner ring and ball assembly contained within an outer ring which has a spherical raceway for self aligning.
  • Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.
Details