NACHI-FUJIKOSHI CORP.
Cutting Tools
Main text
AG Power Drills
AGPSD AG Power Drills
Cutting Force
| Cutting conditions | |||||
|---|---|---|---|---|---|
| Tool | : | AGPSD3.0 | Hole depth | : | 15mm Blind hole |
| Cutting Speed | : | 30m/min | Work Material | : | S50C (180HB) |
| Rotation | : | 3,180min-1 | Cutting Fluid | : | Wet |
| Feed Speed | : | 330mm/min | Machine | : | Vertical machining center |
| Feed | : | 0.1mm/rev Non-step | |||
Wear comparison after 204 holes drilling
Comparison of non-step drilling of tempered alloy steel
| Cutting conditions | |||||
|---|---|---|---|---|---|
| Tool | : | AGPSD6.0 | Hole depth | : | 30mm Blind hole |
| Cutting Speed | : | 24m/min | Work Material | : | SCM440 (32HRC) |
| Rotation | : | 1,272min-1 | Cutting Fluid | : | Wet |
| Feed Speed | : | 230mm/min | Machine | : | Vertical machining center |
| Feed | : | 0.18mm/rev Non-step | |||