NACHI-FUJIKOSHI CORP.
Cutting Tools
Main content
AquaREVO Drills Oil-Hole
|
|
Carbon steel (S50C), Comparison Tool Life with conventional condition
| Diameter | : | Ø8.0 | Work material | : | S50C (180HB) | Cutting Speed | : | 120m/min | Feed Amount | : | 0.254mm/rev |
| Depth of Hole | : | 40mm (5Dc) | Machine | : | Vertical M/C | Cutting Fluid | : | Water-soluble | |||
Double Tool Life than competitor
AquaREVO Drills Oil-Hole’s chip is smaller than competitor
Although it is a multi-purpose drill, even compared to the drill for Stainless steel, more than twice as much drilling
| Diameter | : | Ø8.0 | Work material | : | SUS304 | Cutting Speed | : | 80m/min | Feed Amount | : | 0.20mm/rev |
| Depth of Hole | : | 40mm (5Dc) | Machine | : | Vertical M/C | Cutting Fluid | : | Water-soluble | |||