Skip Navigation

Hydraulic Equipment

Main text

SE/SED-G01-40 Series

Surge-less Circuit (standard equipment)

Electronic box wiring product: auxiliary symbol for relay drive (GR)

Lumped terminal box internal circuit

Advantages of the terminal box wiring product

  • Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary. Due to the built-in varistor the recovery time is short and optimal for circuits for which a high-speed response is necessary.
  • Reduces the occurrence of sparks from the relay contact drive, etc. and lengthens the life of the points of contact


Wiring using the terminal block inside the terminal box

Connector wiring product: auxiliary symbol for the sequencer drive (GRV)

Lumped terminal box internal circuit

Advantages of the connector wiring product

  • We have built in a diode for preventing reverse voltage so the addition of a sequencer output (transistor) protection elements is not necessary
  • One-touch wiring is possible
  • Direct connection to a wire-saving system such as Device Net, etc. is possible


Wiring with an M12-4 pin connector


CE marking

Overseas safety standards

You can use NACHI brand solenoid valves throughout the world with peace of mind.


Specifications

Item SE/SED-G01-40 Series
Maximum pressure ((P,A,B port) 16MPa
Max.flow (note1) 40L/min
Permissible back pressure (T port) 16MPa
Holding power (DC24V) 4.8W
Dust and spray protection type JIS C 0920 IP64(SE-G01), IP65(SED-G01)
Overseas safety standards CE marking
(note1) The maximum flow differs depending on the operation symbol, circuit, and working conditions.