Products
Cutting Tools
Responding to demand for lower processing costs and shorter lead times, as well as your need to process diverse work pieces and to reduce environmental impact.
As your partner in manufacturing excellence, Nachi-Fujikoshi supports you in an ever-evolving environment, where you need to win the process challenges of increased efficiency, increased precision, and increased functionality.
New Products
■DLC-REVO Drills Burrless
■We have added for Non-Ferrous Metals such as aluminum alloys to the Burrless series Reducing the burr at the exit of holes, and conical chips
- Developed Non-Ferrous Metals such as Aluminum alloy with large burrs and weld.
- The shape is optimized for use in Non-Ferrous Metals, while taking advantage of the Burrless concept
- Newly developed DLC-REVO coating reduces welding
■AquaREVO Drills Burrless
■Burrless series
Reducing the burr at the exit of holes, and conical chips
- Thinning shape to reduce the hole expansion and corner shape to cut without leaving burrs.
- Excellent burrless performance on the cross hole which is difficult to deburring
■Hyper Z TAP for Taper pipe threads
■Hyper Z TAP for Taper pipe threads Taps for taper pipe thread appeared in Hyper Z series!
- Lineup for steel and casting according to material.
- Long tool life is realized by surface treatment with excellent wear resistance.
- Continuous machining is possible by suppressing the winding and biting of chips.
■SG Spiral Taps Burrless / SG Spiral Taps Burrless Left Hand Helix
■Burrless series
Zero burrs at the internal diameter of internal thread
- By cutting the inner diameter of the prepared hole at the same time, there is no burr generated on the inner diameter of the internal thread.
- Left hand helix for through holes is also available.
■AquaREVO Mills Burrless
■Burrless series
Suppresing the burrs at the upper side surface of side machining
- ADouble helical design with the right hand helical tooth on the end cutting edge and the left hand helical tooth on the shank side suppresses burrs on the top and bottom surfaces of the workpiece.
- The inclines is lower than multipurpose End mills, achieving high machining accuracy.
■AquaREVO Mills for Stainless Steel
■The new series of “AquaREVO Mills for Stainless Steel” are available
- Newly developed flute design “Air Flutes” (PAT.P)
- Overwhelmy chip evacuation and cooling performance leads high efficiency milling and long tool life
