

(Remark)
1. When symbol are omitted, shift to left side.
2. Threads and number of grease inlet/outlet are shown in tables.
3. Grease nipple A type is attached at grease inlet.
(Remark)
1. When symbol are omitted, shift to left side.
2. Supplementary symbols accord with split housing
3. Threads and number of oil inlet/outlet are shown in tables.
4. Grease nipple of button-head type is attached at grease inlet.
Locating ring for fixed side housing is identified as follows.
locating ring should be prepared besides plummer block housings.
The dimension table show the designation and number of ring required for each bearing.

The designations of combination are obtained by adding each with '+' as following order.
(Remark)
1. Designations for parts not required are omitted.
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.

