○ Optimized flute geometry dramatically improves chip separation and evacuation
○ Offers increased reliability in handling a wide range of work materials. from high-hardness. difficult-to-machine materials to soft steel. which often causes chip-related problems
○ Special lubrication film applied to the surface of AlCrSi-based coating improves lubricating performance as well as resistance to heat and wear
○ Supports dry cutting and high-speed wet cutting while achieving a longer tool life
○ Unique thinning design allows for enhanced bite and minimizes cutting resistance
○ Ensures stable cutting performance with thin work materials as well as small. low-stiffness processing machines
Drill : 6 mm
Speed : 80 m/min
(4.240 min-1)
Feed : 0.2 mm/rev
Material : S50C (180HB)
Conditions
Drill : 6 mm
Speed : 80 m/min(4240 min-1)
Feed : 0.14 mm/rev
Depth : 15 mm Blind
Material : S400 (160HB)
Coolant : Emulsion
Conditions
Drill : 6 mm
Speed : 50 m/min(2650 min-1)
Feed : 0.12 mm/rev
Depth : 15 mm Blind
Material : NAK80 (40HRC)
Coolant : Dry
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.