○ The optimum combination of Carbide and AQUA coating provides wear and heat resistance in FC drilling. resulting in longer tool life compared with conventional FC drills.
○ Special cutting edge design curbs corner wear. the most serious damage concern in FC drilling.
○ Re-sharpening restores tool life to 70% of new drill without re-coating.
Drill : 6.0mm
Speed : 100m/min
(5.300min-1)
Feed : 0.18mm/rev (960mm/min)
Depth : 25mm through hole
Material : FCD450
Coolant : Water soluble
Drill : 6.0mm
Speed : 100m/min
(5.300min-1)
Feed : 0.2mm/rev
(1.060mm/min)
Depth : 20mm through hole
Material : FC250
Coolant : Air blow
Drill : 6.0mm
Speed : 100m/min
(5.800min-1)
Feed : 0.13mm/rev
(760mm/min)
Depth : 20mm through hole
Material : FC250
Coolant : Air blow
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.
Copyright © 2025 Nachi-fujikoshi corp. All Rights Reserved.